Select Page


5 out of 5 based on 1 customer rating
(1 customer review)


Patent Pending

SKU: N/A Category:
  • Description
  • Photos
  • FAQ
  • Specs / Data Sheets
  • Reviews (1)


PaintPlus® is a tough, water-based, hybrid floor coating that combines epoxy-like toughness with the flexibility and ease of use of latex paint. PaintPlus is designed for use over PerfectPrimer products and more.

Perfect for:

Professional workshops
Light industrial areas
Concrete balconies and deck


  • Safer and easier to apply than traditional epoxy systems
  • Cleans up with water
  • Non-toxic, low VOC
  • Durable and flexible
  • Chemical-resistant
  • Low-odor
  • For interior and exterior use
  • Specified for use with all PerfectPrimer Products
  • Suitable for heavy traffic areas (with second coat)
  • Bonds Direct To Metal (DTM)

Instructions for PaintPlus:

SURFACE CONDITION AND PREPARATION: All surfaces must be dry, clean, free of chalk and loose paint, grease, oil, wax, silicone, efflorescence etc. Asphalt and previously painted concrete must be scrubbed with PerfectCleaner according to label directions, or a strong detergent such as TSP. Rinse thoroughly with clean water and allow to stand until completely dry. New and/or unpainted concrete must be primed with PerfectPrimer first, or “etched” with a 25% solution of muriatic acid to water. Apply solution to concrete and allow to stand until bubbling ceases, rinse THOROUGHLY with clean water and allow to stand until completely dry. Wear proper eye, skin, and respiratory protection.

APPLICATION: Stir well to a smooth consistency immediately before use. Apply with a high 3/8″ or 1.2″ quality medium nap synthetic roller cover and a Nylon or Polyester brush.

UNPAINTED CONCRETE: First coat MUST be thinned with 1 pint of clean water per gallon of paint and brushed or rolled well into surface. Dries to touch in one hour, second coat may be applied after 12 hours dry time.

ASPHALT AND PREVIOUSLY PAINTED CONCRETE: Apply 2 coats allowing 12 hours between coats. For added slip prevention, up to one pound of clean and dry fine silica sand may be added to each gallon of paint. For best service, add sand in first coat material only. Stir occasionally during application to prevent settling of sand. Will take foot traffic in two hours, however, seven days curing time MUST elapse prior to automobile traffic exposure.



Where should I NOT use PaintPlus?

Do not apply PaintPlus over the following surfaces or coatings: Hydraulic cement, silicone or silicate sealers, epoxies, polyurethanes, and some glossy paints. To determine whether proper adhesion is possible, apply a small test patch of Sure-Grip to an inconspicuous area of the substrate in question and allow to dry 48 hours. Check adhesion by applying and then removing a piece of duct tape from the test patch. If any paint remains on the duct tape, the surface is not suitable for coating.
CLEANUP: Clean all hands and tools with soap and warm water immediately after use. Clean spatters immediately with warm soapy water. If spatters are allowed to dry, clean with xylene, lacquer thinner, or other strong solvent (read cautions and instructions on solvent label). CAUTION, some solvents may dissolve asphalt


Specs / Data Sheets

Data Sheet PDFs

PDF Coming Soon

Customer reviews

Rated 5 out of 5 stars
1 review
4 stars 0 0 %
3 stars 0 0 %
2 stars 0 0 %
1 star 0 0 %

1 review for PaintPlus

Add a review

Use one of the allowed file type: jpg,png.

    You may also like…

    • PerfectPaint FloorPrep bucket

      PerfectPaint® Floating Floor Prep

      5 out of 5
    • PerfectPrimer bucket cropped 1000px

      PerfectPrimer® Encapsulant

      4.925 out of 5

    Find Us On

    Amazon logo
    Walmart logo
    Exterior Coatings logo

    Our Customers

    Harvard University logo
    The School District of Philadelphia logo
    Vanderbilt Beach Resort logo
    Cincinatti Bell logo
    Cradle of Aviation Museum
    United States Navy logo
    U.S. General Services Administration logo
    US Army Corps of Engineers logo
    United States Department of Veteran Affairs logo