Select Page

PerfectSealer

$130.00$390.00

Quantity
SKU: N/A Category:
  • Description
  • Instructions
  • Photos
  • Specs / Data Sheets
  • Reviews (0)

Description

The only sealer designed to protect against food stains while enhancing color, and protecting your paving stones.

Protect your pavers, decorative concrete, natural stone, and manufactured stone. Sealer for SandRich® and RubberDecky® systems.

PerfectSealer provides excellent resistance to stains caused by:

  • Food
  • Grease
  • Oils
  • Rust
  • Grass
  • Leaves
  • Snow salts
  • UV rays
  • Chlorine
  • And more

Benefits:

  • Adds life and color to old and new paving stones
  • Easy DIY application
  • Reduces concrete “dusting”
  • Inhibits mold growth
  • Good chemical resistance
  • Excellent abrasion resistance
  • Safe for indoors and outdoors use
  • Contains no dangerous VOC’s or odors
  • Safe to use, cleans up with water
  • Non-yellowing satin finish
A paving stone sealed with PerfectSealer (left) vs unsealed (right)

PerfectSealer is a tough, water based, one part, film forming, cross-linked acrylic-urethane coating with excellent wear and protective properties.

Coverages over paving stones: 250-300 sq. ft. per gallon. Two coats are recommended for maximum protection.

Coverages over systems:
SandRich: 100 sq. ft. per gallon for one coat.
Over RubberDecky® or Decorative concrete: 200 sq. ft. per gallon. Use two coats.

SSM is not responsible for site conditions, existing coatings, weather, applicator error, or other known or unknown conditions that may affect the product performance.

Instructions

Mix briefly for 30 seconds prior to applying. Take care not to induce air into the material when mixing. This will cause “bubbles” in the coating when applied. Clean all surfaces using masonry cleaner, a hose, or pressure washer. Once visibly dry, apply PerfectSealer using a pump sprayer or 3/8″ paint roller to saturation. Do not allow the sealer to puddle. Once surface is dry, you may apply a second coat (recommended).

Application:

Apply using ½” or ¾” nap roller. Move roller l smoothly and slowly this will lessen chances of bubbling of the final film. Alternative method: Apply using a bug sprayer, then back-roll for an even coat. Clean up with soap and water. Apply second coat when first coat is dry to the touch. Total cure time 24 hours.

Do not use when Humidity Exceeds 75%.
Do not allow Material to puddle.
Do not allow Material to freeze.

Over SandRich®, apply one saturation coat at 100 sf per gallon. Over RubberDecky® apply two thin coats at 300-400 sf per gallon.

Specs / Data Sheets

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “PerfectSealer”

Use one of the allowed file type: jpg,png.

    Find Us On

    Amazon logo
    Walmart logo
    Exterior Coatings logo

    Our Customers


    Harvard University logo
    The School District of Philadelphia logo
    Vanderbilt Beach Resort logo
    Cincinatti Bell logo
    Cradle of Aviation Museum
    United States Navy logo
    U.S. General Services Administration logo
    US Army Corps of Engineers logo
    United States Department of Veteran Affairs logo